Homemade Edge Sending Machine With Drum Sander || DIY sander machine

Suthar Sandeep 2274 July 14, 2018 Comments

Introduction:-

The sander machine is a power tool used to make smooth surfaces by using sanding disc. Woodworking sander machines are usually electrically powered, and those used in auto-body repair work by use of compressed air. There are many different types of sanders are available in the market for different purposes. Also multi-purpose power tools and electric drills may have some sander attachments.

 

Disc sander:-A disc sander machine is most commonly used as a stationary sander machine that consists of circular shaped sandpaper attached to a wheel turned by an electrically powered motor or compressed air. The wooden work piece is sat on a front bench that can be adjusted to various angles when it is required. It can be used for rough or fine sanding depending on the different types of sanding grit used.

 

Belt sander:-In the market usually two types of belt sanders are available, one is fixed on the workbench and second is hand-held or stationary.

 

Flap sander or sanding flap wheel:- A sanding attachment shaped like a disc and used on a hand-held drill or mounted on a bench grinder for finishing and polishing of curved surfaces.

 

Drum sander:-Drum sander is a large sander machine that uses a rotating sanding drum. As with a planer machine, the operator is adjusts feed rollers to feed the wooden work piece into the drum sander machine. The sander machine is smooth its surfaces and sends it out the other side. Drum sander is good for finishing large surfaces of work piece.

 

Orbital sander:-Orbital sander machine is hand-held sander machine that vibrates in small circles or "orbits." Here the sanding disc is spinning while moving simultaneously in small ellipses causes the orbital action that it is known for. This type of sander is mostly used for fine sanding or where little material needs to be removed.

 

Oscillating spindle sander:-The sander mounted on a spindle that both rotates and oscillates in and out or up and down along the axis of the rotation of spindle. This type of sander is good for sanding curves and contours that would be difficult with hand or orbital sanding.

 

Profile Shaper/Sander:-An industrial sanding machine consisting of a powered transport with a series of workstations for performing shaping, sanding, or other finishing operations on one or more edges of components in cabinetry, furniture, shelving, and many other products. These types of machines create and finish decorative edges in an automated process using rotating 'shaping heads', 'sanding wheels', 'foil applicators' and other specialized equipment.

 

Here I make a sander for my own use that is used for the edges of the wooden work piece. I have used 13mm drill machine to make this type of sander machine.

 

Parts Used:-

Plywood pieces of 18mm thickness (L*W)

12”*6.5”

7.5”*6.5”

9.5”*4”

2 Nos. 40mm diameter plywood pieces

4 Nos. ¼ bolts (1½ “ length)

1 Nos. 5/16 Bolt (2½ “ length)

Sanding paper

2 Nos. Pipe clamp

Screws

 

How To Make :-

Step 1 :- Make a drum sander tool

First step is, make a small drum sander tool. So, first cut the 2 pieces of 40mm diameter from plywood of 18mm thickness by using of 40mm diameter hole saw cutter.  Then after, attach both pieces on the 5/16 size bolt of 2½” length by using of glue and tighten the nut on the bolt. Cut the right size of sanding paper and attach on the drum by using of glue.

Now, the drum sander tool is ready to use.

 

Step 2 :- Cut the plywood pieces

Second step is cut the plywood pieces of (12”*6.5”) (7.5”*6.5”) (9.5”*4”) size of 18mm thickness plywood to make a support of edge sanding machine. Make a round shape of (7.5*6.5) and (9.5&*4”) size plywood pieces. Then after, attach all the plywood pieces to make a support of drill machine by using of glue and screws.

 

Step 3 :- Attach drill machine

This is the last step to make edge sanding machine with drum sander. I have used electric drill machine of 13mm capacity. Attach the drill machine with support part. I have used pipe clamp and bolts to attach the drill machine with the support.

 

Attach the drum sander tool in the drill chuck. Now, the edge sanding machine with drum sander is ready to use.

 

For better understanding, watch the video given below.

homemade sander machine diy sander drum sander machine

Comments

  1. Judix,    [ New York ]
    August 7, 2018
    Reply

    nTtsuB http://www.LnAJ7K8QSpfMO2wQ8gO.com

  2. Judix,    [ New York ]
    August 7, 2018
    Reply

    kDEMt8 http://www.LnAJ7K8QSpfMO2wQ8gO.com

  3. Judix,    [ New York ]
    August 8, 2018
    Reply

    uzFc4w http://www.LnAJ7K8QSpfMO2wQ8gO.com

  4. Judix,    [ New York ]
    August 8, 2018
    Reply

    zv1HfH http://www.LnAJ7K8QSpfMO2wQ8gO.com

  5. bellaichouni,    [ Commune EL-ATTAF ALGERIE ]
    August 9, 2018
    Reply

    Bonjour. Veuillez me donner les longueurs du tuyau en cm ainsi que la plaque de contre plaqué.

  6. Silvio,    [ Paraná brasil ]
    October 24, 2018
    Reply

    Muito bom gostei muito vou tentar faser um.

Leave your comment